Solution for Anti Theft and Loss Prevention with Motorcycle GPS Positioning Tracker

Triple Positioning: Integrating GPS, Beidou, and base station positioning to ensure full-process positioning without blind spots.

Alarm on Vibration, Track on Movement: Once the vehicle changes from a stationary state to a moving state, the system will immediately trigger an alarm and start tracking.

Diversified Ways to Obtain Real-Time Dynamic Positioning Information: It can reply with the vehicle's current Chinese geographical location information via SMS, and users can also log in to the track website to view the movement trajectory and download relevant text materials.

Low-Voltage Alarm: When the power of the device's built-in battery is low, the system will automatically send an SMS to the user to remind them to charge it.

Geofencing: When the vehicle enters or leaves the preset area, the system will trigger an alarm and start tracking.

In view of the characteristics of motorcycles, the core functions of this new vehicle recorder (wired GPS tracker) are as follows:

Real-Time Positioning and Anti-Theft Tracking: Adopting GPS + Beidou dual-mode satellite positioning, assisted by base stations, ensuring a positioning accuracy of 5-15 meters. It supports 24/7 real-time tracking, with location updates synchronized via the APP, and its signal strength is superior to that of wireless devices.

Anti-Tampering Alarm Technology:

Power-Off Alarm: Immediately triggers an alarm when the power cord is cut, and activates the backup battery to maintain positioning for 2 hours.

Light-Sensing Anti-Tampering: Triggers an alarm by detecting abnormal light sources (such as light changes during disassembly), with higher concealment.

Vibration Sensor: When the device changes from stationary to moving, the system automatically triggers an alarm and records the trajectory.

Geofencing: Presets a safe area and pushes notifications when the vehicle crosses the boundary; combined with historical track replay, it enables precise tracking.

Installation and Concealment:

Wired GPS Trackers: The positive pole is connected to the battery, the negative pole is grounded, and the ACC wire is connected to the ignition lock, ensuring the device works synchronously with the vehicle's startup and shutdown.

Wireless GPS Trackers: Installed in concealed areas such as inside the headlight, under the battery, or in the seat bucket interlayer, avoiding signal interference caused by metal shielding.

Coping with "Harsh Working Conditions" to Extend Device Lifespan:

The device itself must meet an IP65 or higher waterproof rating (IP67 is recommended for motorcycles to cope with rainy days and car washing). Additional sealing is required at the interfaces: power connectors should be wrapped with waterproof mastic, and wire harness threading holes should be sealed with silicone plugs (especially in open-air locations). Avoid installation in waterlogged areas (such as the lowest point of the vehicle chassis) to prevent long-term immersion.

Motorcycle anti-theft has achieved full-process coverage from "prevention - alarm - tracking - retrieval". Its emergence aims to address the situation where traditional anti-theft measures are ineffective in preventing vehicle theft, and it can help owners retrieve stolen vehicles and assist the police in apprehending criminals after theft. With high concealment and strong security performance, it features a built-in battery and connection to the vehicle battery, and multiple low-power working modes enable 24/7 operation.