Details Easily Ignored To Installation The Vehicle GPS Locator Devices
author: Ada Wu
2023-01-05
Details Easily Ignored To Installation The Vehicle GPS Locator Devices
The risk control management of the auto loan industry is divided into two modules, the first is the pre loan evaluation of vehicles, and the second is the post loan monitoring of the borrower's behavior.
The pre loan evaluation of vehicles is mainly to conduct a comprehensive inspection of vehicles and estimate their value.
Post loan monitoring is mainly to track and locate vehicles in real time through GPS hardware installation and software system.
An excellent GPS platform+professional industry personnel can predict the borrower's default event, and prevent the occurrence of vehicle loss at the first time.
Next, we will take the car loan steward platform as an example to explain in detail the common details of daily work of people in the car loan GPS industry.
First， installation location selection：
1. Installation position of wired equipment gps locator
The installation location of wired tracker is less selected because it needs to be connected to normal power.
Suggested installation position: the driver, the co driver, the extension line of the engine battery (far away from the concentrated part of the engine and electronic equipment) and other positions should not be too closed (the boot of some vehicles is very closed, and the positioning is affected, so selective installation is required)
The pre loan evaluation of vehicles is mainly to conduct a comprehensive inspection of vehicles and estimate their value.
Post loan monitoring is mainly to track and locate vehicles in real time through GPS hardware installation and software system.
An excellent GPS platform+professional industry personnel can predict the borrower's default event, and prevent the occurrence of vehicle loss at the first time.
Next, we will take the car loan steward platform as an example to explain in detail the common details of daily work of people in the car loan GPS industry.
First， installation location selection：
1. Installation position of wired equipment gps locator
The installation location of wired tracker is less selected because it needs to be connected to normal power.
Suggested installation position: the driver, the co driver, the extension line of the engine battery (far away from the concentrated part of the engine and electronic equipment) and other positions should not be too closed (the boot of some vehicles is very closed, and the positioning is affected, so selective installation is required)
2.Installation position of wireless equipment asset tracker
There are many options for installing wireless devices, generally speaking, how to hide and how to install them.
Location selection: concealment under windshield, concealment under interior trim panel, concealment on left and right sides of trunk, concealment under seat, concealment around lower door strips on both sides of body, bumper, concealment behind passenger compartment, interior of car rear-view mirror, sunroof, interior of spare tire of car, fuse box on left and right sides of dashboard, etc.
The specific installation location of GPS terminal depends on the actual situation of the vehicle.
3. Precautions for installation
GPS terminals belong to electronic products. The positioning accuracy of GPS terminals will be affected by the installation location.
When selecting the installation location of GPS terminals, we need to consider whether it is waterproof, shockproof, ash proof, high temperature and low temperature, interference proof and other factors, and take corresponding protective measures.
A. Waterproof: When installing the GPS terminal, select a location that is not easy to get water, such as far away from the air conditioner outlet, to prevent some water from seeping into the GPS terminal due to large temperature difference changes in the vehicle or the air conditioner itself, which will affect the service life of the GPS terminal.
B. Shockproof: In order to ensure the positioning accuracy of the GPS terminal, the GPS terminal cannot be installed in the position with large long-term vibration.
C. Ash prevention: Many GPS terminals have no ash prevention function, and more dust seeps into the GPS terminal, which will easily affect the positioning accuracy and life of the locator. Therefore, try to choose a place that can prevent dust when installing the GPS terminal.
D. High temperature and low temperature prevention: Like many electronic products, GPS terminals also have a suitable working temperature range. For example, the working temperature range of a certain Lebit car loan GPS terminal is - 20 ℃~+70 ℃. If the working temperature of the car loan GPS terminal exceeds this range, it is likely to cause failures.
E. Anti interference: GPS signal will be interfered by metal objects. In order to ensure accurate positioning of GPS terminal, there shall be no metal objects above the GPS terminal.
Second， GPS equipment vehicle locator device abnormality (FAQ)：
1. Why is the device offline?
(1) The equipment is shut down or removed after power failure.
(2) The device has no GPS signal.
(3) The SIM card is in arrears and the server expires.
(4) Whether the equipment is connected to the normal power supply, and if the vehicle is not connected to the normal power supply, the equipment will give a power-off alarm after the vehicle is shut down
2. What is the reason why GPS is not positioned or the point is pulled into a straight line?
(1) Too close to metal objects
(2) The installation position of the equipment is overheated (close to the engine)
(3) The equipment is wet, and the electronic equipment must not be affected by moisture
3. Power off alarm may also be an installation problem
(1) Whether the equipment is connected to the normal power, and the failure to connect to the normal power causes the equipment to give a power-off alarm after the vehicle shuts down.
(2) The built-in battery of the wired locator device is turned off by default. If the switch is turned on before it is fully connected, a power-off alarm occurs
Conclusion: Don't worry when encountering the above problems, check whether the installation is in place according to the problems, analyze the reasons calmly, and connect with the technical customer service of the equipment supplier.
Location selection: concealment under windshield, concealment under interior trim panel, concealment on left and right sides of trunk, concealment under seat, concealment around lower door strips on both sides of body, bumper, concealment behind passenger compartment, interior of car rear-view mirror, sunroof, interior of spare tire of car, fuse box on left and right sides of dashboard, etc.
The specific installation location of GPS terminal depends on the actual situation of the vehicle.
3. Precautions for installation
GPS terminals belong to electronic products. The positioning accuracy of GPS terminals will be affected by the installation location.
When selecting the installation location of GPS terminals, we need to consider whether it is waterproof, shockproof, ash proof, high temperature and low temperature, interference proof and other factors, and take corresponding protective measures.
A. Waterproof: When installing the GPS terminal, select a location that is not easy to get water, such as far away from the air conditioner outlet, to prevent some water from seeping into the GPS terminal due to large temperature difference changes in the vehicle or the air conditioner itself, which will affect the service life of the GPS terminal.
B. Shockproof: In order to ensure the positioning accuracy of the GPS terminal, the GPS terminal cannot be installed in the position with large long-term vibration.
C. Ash prevention: Many GPS terminals have no ash prevention function, and more dust seeps into the GPS terminal, which will easily affect the positioning accuracy and life of the locator. Therefore, try to choose a place that can prevent dust when installing the GPS terminal.
D. High temperature and low temperature prevention: Like many electronic products, GPS terminals also have a suitable working temperature range. For example, the working temperature range of a certain Lebit car loan GPS terminal is - 20 ℃~+70 ℃. If the working temperature of the car loan GPS terminal exceeds this range, it is likely to cause failures.
E. Anti interference: GPS signal will be interfered by metal objects. In order to ensure accurate positioning of GPS terminal, there shall be no metal objects above the GPS terminal.
Second， GPS equipment vehicle locator device abnormality (FAQ)：
1. Why is the device offline?
(1) The equipment is shut down or removed after power failure.
(2) The device has no GPS signal.
(3) The SIM card is in arrears and the server expires.
(4) Whether the equipment is connected to the normal power supply, and if the vehicle is not connected to the normal power supply, the equipment will give a power-off alarm after the vehicle is shut down
2. What is the reason why GPS is not positioned or the point is pulled into a straight line?
(1) Too close to metal objects
(2) The installation position of the equipment is overheated (close to the engine)
(3) The equipment is wet, and the electronic equipment must not be affected by moisture
3. Power off alarm may also be an installation problem
(1) Whether the equipment is connected to the normal power, and the failure to connect to the normal power causes the equipment to give a power-off alarm after the vehicle shuts down.
(2) The built-in battery of the wired locator device is turned off by default. If the switch is turned on before it is fully connected, a power-off alarm occurs
Conclusion: Don't worry when encountering the above problems, check whether the installation is in place according to the problems, analyze the reasons calmly, and connect with the technical customer service of the equipment supplier.
The Advantages Of Wireless Equipment Tracker Gps Car Locators
Attention To Data Pre-warning Of Auto Tracker App Platform
Related Article
The dash cam with GPS, through functions such as real-time monitoring and driving behavior analysis, aids engineering vehicle transportation fleets in enhancing transportation efficiency, ensuring safe operations, and simultaneously reducing operational costs. It is an indispensable tool for fleet management.
The Introduction of Dash Cams Enhances Safe and Efficient Management of Engineering Fleet Vehicles
The GAT23 4G GPS tracker magnetic from Great-will company offers multiple location modes, 4G CAT1 network support, and a built-in high-capacity battery. It is waterproof and wireless, requiring no external power or installation. With its precise location, global network coverage, and ultra-long standby battery life, the GAT23 has profoundly impacted daily life, work styles, and social development.
4G GPS Tracker Magnetic GAT23 with A Multi Functional High Accuracy Long Standby Tracking Solution
The TR02K is a wired GPS tracker designed for a variety of vehicles, including car and motorcycle, offering real-time location tracking, multiple alarm functions, and remote monitoring. Its miniature size and easy-to-hide design, coupled with multiple working modes that support low-energy consumption, ensure extended battery life.
Versatile TR02K GPS Tracker Suitable for Car and Motorcycle
The GAT23 GPS tracker with magnet features 4G fast tracking, IP65 waterproof rating, long battery life, and immediate alert upon tampering. It safeguards asset security, enhances cost-efficiency, accelerates business operations, and is an essential tool for motorcycle and cargo logistics.
4G GPS tracker with magnet of A New Upgrade in Asset Management
For More Questions Please
Contact Us
+86 - 18933252695
info@great-will.com
Building A2, Gosun West Lake Intelligence Industrial Park, No. 40 Hongling 3rd Road, Shuikou , Huicheng District, Huizhou City, Guangdong Province,China.