Can GPS fleet tracker device installation be safer
author: Ada Wu
2023-03-27
Can GPS fleet tracker device installation be safer
GPS trackers car have been widely used and are very common. In the automotive industry, they are also indispensable anti-theft positioning equipment, playing an important role in vehicle management and vehicle anti-theft. GPS vehicle fleet tracking tracker are very advanced risk control equipment in some industries, but in certain industries, there are no secrets to speak of, and it is inevitable to be removed. Therefore, how to prevent GPS locators from being removed is a problem that practitioners in certain industries have to consider.
So how do you prevent GPS locators from being removed? What are some effective ways to prevent GPS locators from being removed?
1. Anti disassembly type GPS locators can be selected to increase the difficulty of removal when the equipment is artificially damaged.
2. Select a GPS locator with a standby power supply, which can still locate for a short time and send an alarm message when the external power supply is damaged.
3. The installation shall be concealed as much as possible. Install the equipment on the vehicle where it is not easy to be found.
4. After removal, the track playback function can be used to find the movement pattern of people or vehicles.
5. If conditions permit, two GPS locators can be installed, and thieves take it lightly after removing one, often not looking for the other.
Installation method
The external power supply GPS locator must be connected to the vehicle power supply in order to work 24 hours. Generally, it is impossible for criminals to use this product to track other people's vehicles.
Because it must be connected to the vehicle power supply, it is different from the general external locator. Therefore, it is not recommended to use an external power supply.
Installation route
1.If you understand electricity, you can also install it yourself. In fact, just find the positive and negative electrodes of the car power supply. The negative electrode is very easy to find. The place where the car body is grounded is the negative electrode. The positive electrode is found in the fuse box, near the car key switch, or directly connected to the battery.
2.It is best to connect to a constant current, which is a power cord that is not affected by the car key switch and is directly led from the car battery.
3. Note that the light side of the GPS locator should face the sky, and the sky side should not be close to metal objects blocking the internal GPS antenna. It also needs to receive satellite signals from 20000 kilometers away.
4. It can also be installed by relevant technical personnel.
Installation position
1. At the roof lamp above the front windshield
2. Concealed area in the trim panel under the front windshield
3 Concealed area around the front instrument panel
4 In the door partition
Under the trim panel under the rear windshield
6. The front fuse is inside and needs to be waterproof
7. Pay attention to waterproof under the wiper plate
Note that if the windshield is pasted with a metal thermal insulation layer or heating layer, it will reduce GPS reception signal, causing GPS to work improperly. Pay attention to the installation position of the replacement equipment at this time.
Installation points
1.In order to avoid theft damage, the equipment location should be hidden as much as possible
2. Avoid placing them together with emission sources, such as wireless reversing radar, anti-theft devices, and other on-board communication devices
3. It can be fixed with a tie or pasted with a wide sponge strong double-sided adhesive.
4. The equipment has a GSM antenna and a GPS antenna, which should be installed with the front facing up (facing the sky)
Vehicle GPS Tracker Installation
Use of Car Camera Dash Cam
Related Article
The dash cam with GPS, through functions such as real-time monitoring and driving behavior analysis, aids engineering vehicle transportation fleets in enhancing transportation efficiency, ensuring safe operations, and simultaneously reducing operational costs. It is an indispensable tool for fleet management.
The Introduction of Dash Cams Enhances Safe and Efficient Management of Engineering Fleet Vehicles
The GAT23 4G GPS tracker magnetic from Great-will company offers multiple location modes, 4G CAT1 network support, and a built-in high-capacity battery. It is waterproof and wireless, requiring no external power or installation. With its precise location, global network coverage, and ultra-long standby battery life, the GAT23 has profoundly impacted daily life, work styles, and social development.
4G GPS Tracker Magnetic GAT23 with A Multi Functional High Accuracy Long Standby Tracking Solution
The TR02K is a wired GPS tracker designed for a variety of vehicles, including car and motorcycle, offering real-time location tracking, multiple alarm functions, and remote monitoring. Its miniature size and easy-to-hide design, coupled with multiple working modes that support low-energy consumption, ensure extended battery life.
Versatile TR02K GPS Tracker Suitable for Car and Motorcycle
The GAT23 GPS tracker with magnet features 4G fast tracking, IP65 waterproof rating, long battery life, and immediate alert upon tampering. It safeguards asset security, enhances cost-efficiency, accelerates business operations, and is an essential tool for motorcycle and cargo logistics.
4G GPS tracker with magnet of A New Upgrade in Asset Management
For More Questions Please
Contact Us
+86 - 18933252695
info@great-will.com
Building A2, Gosun West Lake Intelligence Industrial Park, No. 40 Hongling 3rd Road, Shuikou , Huicheng District, Huizhou City, Guangdong Province,China.