4G Wired GPS Tracker
author: Ada Wu
2022-12-13
It has advantages such as small size, high intensity, fast responding, high selectivity and repeatability---best vehicle gps tracking device.
⭕GPS Chip: 6226,GSM Chip:8910
⭕GPS+LBS position ways
⭕Real-Time Tracking
⭕Car ACC On/Off Status
⭕Power Down Alarm,Low Power Alarm,Over Speed Alarm,Illegal Dismantling Alarm
⭕Blind Area Uploading Data,Inflexion Upload,Upload data automatically in emergency situation
⭕Epo Located For Assistance
⭕Static Mode,Upgrade Remotely
⭕Regular tracking returns positioning information such as longitude and latitude according to the set interval time.
⭕GPS Chip: 6226,GSM Chip:8910
⭕GPS+LBS position ways
⭕Real-Time Tracking
⭕Car ACC On/Off Status
⭕Power Down Alarm,Low Power Alarm,Over Speed Alarm,Illegal Dismantling Alarm
⭕Blind Area Uploading Data,Inflexion Upload,Upload data automatically in emergency situation
⭕Epo Located For Assistance
⭕Static Mode,Upgrade Remotely
⭕Regular tracking returns positioning information such as longitude and latitude according to the set interval time.

Vehicle status detection:
1.Ignition/shutdown status: ACC ON/OFF status is included in each uploaded data package.
2.Vehicle power failure warning. When the host detects that the vehicle voltage is low to a certain value (less than 5V), it will report the power failure reminder.
3.Over speed alarm, the platform is set with the maximum speed limit value. When the equipment GPS tracking devices speed is greater than the set value report the over speed alarm.
4.Oil circuit detection supports the functions of platform and SMS to cut off oil and power.
Other functions:
①Blind zone supplementary transmission function, which can store data when the terminal is located and not online. Uploading data when a signal is normally online.
②EPO auxiliary positioning function. The terminal supports EPO auxiliary positioning function to enhance positioning effect.
③Supplementary transmission of inflection point: when the equipment direction angle changes more than a certain angle, immediately upload a position data to optimize the trajectory.
④Remote upgrade manager.
Low power consumption: in static mode, 3D three-axis acceleration sensor can sense the vehicle vibration status in real time. When the terminal is powered on, it is in motion mode. When the terminal is still for 5 minutes, it is in static mode. Turn off the GPS module, and if there is vibration, it will enter the motion mode.
Requirements for selecting terminal installation vehicle location tracking device
A. Waterproof: the location where water is not easy to enter shall be selected to ensure the dryness of the terminal, and attention shall be paid to keeping away from the air outlet of the air conditioner to prevent temperature difference from changing
During melting, condensate water accumulates inside the terminal, which seriously affects the service life of the product.
B. Shockproof: the terminal cannot be installed in the place with large long-term vibration.
C. Anti interference: the terminal shall be far away from audio, video, intercom and other electronic equipment in the vehicle to prevent conducted interference and radiated interference.
2G Wired Gps Tracker
4G Wireless Magnetic Gps Tracker
Related Article
The dash cam with GPS, through functions such as real-time monitoring and driving behavior analysis, aids engineering vehicle transportation fleets in enhancing transportation efficiency, ensuring safe operations, and simultaneously reducing operational costs. It is an indispensable tool for fleet management.
The Introduction of Dash Cams Enhances Safe and Efficient Management of Engineering Fleet Vehicles
The GAT23 4G GPS tracker magnetic from Great-will company offers multiple location modes, 4G CAT1 network support, and a built-in high-capacity battery. It is waterproof and wireless, requiring no external power or installation. With its precise location, global network coverage, and ultra-long standby battery life, the GAT23 has profoundly impacted daily life, work styles, and social development.
4G GPS Tracker Magnetic GAT23 with A Multi Functional High Accuracy Long Standby Tracking Solution
The TR02K is a wired GPS tracker designed for a variety of vehicles, including car and motorcycle, offering real-time location tracking, multiple alarm functions, and remote monitoring. Its miniature size and easy-to-hide design, coupled with multiple working modes that support low-energy consumption, ensure extended battery life.
Versatile TR02K GPS Tracker Suitable for Car and Motorcycle
The GAT23 GPS tracker with magnet features 4G fast tracking, IP65 waterproof rating, long battery life, and immediate alert upon tampering. It safeguards asset security, enhances cost-efficiency, accelerates business operations, and is an essential tool for motorcycle and cargo logistics.
4G GPS tracker with magnet of A New Upgrade in Asset Management