Installation Details and Precautions for Mobile Digital Video Recorder (MDVR)

Wire Vehicle GPS Tracker｜OBD GPS Tracker｜Asset GPS Tracker｜MDVR Vehicle CCTV｜In-vehicle Dash Cam｜Bodycam

Benefits of Installing a Mobile Digital Video Recorder (MDVR):

1. Cameras can be distributed as needed to monitor any desired location.

2. Provides evidence of incidents such as collisions, cargo loss, theft, and fuel theft, reducing potential troubles.

3. Enhances safety and convenience by providing a clear view of surrounding vehicles and pedestrians while driving, aiding in lane changes.

4. MDVR can connect to 3G/4G networks, allowing remote real-time video monitoring, making it ideal for fleet owners to stay in control of their vehicles.

5. Offers a rearview camera for practical use. The Sito Communication Systems recorder M52A features Driver Monitoring System (DMS) and Advanced Driver Assistance Systems (ADAS) to alert and report fatigue driving, phone use, and smoking.

6. GPS tracking is available, allowing constant monitoring of vehicle whereabouts to prevent unauthorized use. It also includes remote fuel and power cutoff capabilities in case of theft.

Remote Monitoring Center Car DVR Recorder for Vehicle Location and Video:

Installing an MDVR comes with many benefits, but it's crucial to ensure proper equipment installation. Let's first discuss the installation of the MDVR and related precautions.

-01- Tools Preparation

-02- Installation Methods and Steps

Step 1: Determine Camera Placement and Wiring Routes.

Camera and microphone placement should align with the specific monitoring objectives of the customer. Consider the following principles when choosing camera locations:

1. Cover the areas you need to monitor.

2. Ensure convenient and secure camera installation.

3. Plan for easy wiring.

4. Protect cameras from obstruction or damage.

5. Account for potential environmental factors like backlighting.

Precautions: Do not fix the cameras permanently at this stage, as adjustments may be necessary later.

Proper wiring for the vehicle monitoring system car dvr recorder is critical for reliable and stable system operation. Before installation, pay attention to the following:

1. All cables should be placed inside protective conduit. Install wiring in alignment with the vehicle's original cable routing, secure it along existing cable tracks, and tie it to the vehicle's original cables for a neat and concealed installation, preventing accidental damage.

2. GPS antennas should be placed in an unobstructed area with a clear view of the sky for optimal positioning. Follow the standard guidelines for external GPS gain antennas, positioning them as shown in the diagram, typically near the windshield or vehicle inspection sticker area.

3. Connect the left and right turn signals and reverse signal wires to the corresponding alarm input wires on the mobile digital video recorder MDVR.

4. Main Power Supply: The main power supply line should directly connect to the vehicle's battery without any switches. Use a three-core power line with a diameter greater than 1.0 square millimeters. Ensure proper polarity matching for power connections, and connect the ACC signal wire to the vehicle's ignition key.

Step 2: Determine Mobile DVR and Display Screen Placement.

The car DVR recorder can be installed on the luggage rack, under the seat, or another suitable location to minimize vibrations. To ensure proper cooling, avoid poorly ventilated areas. Additionally, install the device in a location inaccessible to the driver and passengers.

Precautions:

1. Install the equipment in a low-vibration area.

2. Avoid areas with poor ventilation.

3. Ensure water and moisture resistance.

4. Keep the equipment out of reach of drivers and passengers.

Step 3: Connect the Power Supply Wires for the car dvr camera video recorder and Display Screen.

- Connect the red and black wires from the power supply directly to the vehicle's battery. The red wire connects to the positive terminal, while the black wire connects to the negative terminal.

- Connect the yellow wire to the ignition line, which is the position where all dashboard lights are on when the key is turned.

Note: Ensure proper electrical connections and polarity matching for safety.

---

 

Why Choose US? 

 

We take pride in developing GPS & MDVR vehicle telematics devices to the highest global standards and delivering reliable IoT solutions. 

From design to development and final products, quality checks are built into every phase of the product creation process.

 

● ISO9001, SGS Quality Management System
● More than 500 Production Line Employees
● More than 15 Senior Engineers
● 20,000 pcs Daily Output
● 2 R&D Centers
● More than 50 Countries Served

 

 

→ Contact us to get more information to improve & secure your fleet business！

• Building A2, Gosun West Lake Intelligence Industrial Park, No. 40 Hongling 3rd Road, Shuikou, Huicheng District, Huizhou City, Guangdong Province, China.
• +86 - 18933252695
• info@great-will.com