GPS Tracker Alarm Functions Enhancing Vehicle Safety and Protection
author: Ada Wu
2023-08-01
The gps tracker alarm system serves a significant role in vehicle and asset tracking. Through real-time alerts and notifications, it helps vehicle owners or administrators promptly detect anomalies and issues, thereby enhancing the safety of vehicles and assets. The following are the key roles of the gps tracker’s alarm function:
1. Vibration Alarm:
When a vehicle experiences a collision or external vibration, the GPS locator's vibration alarm function immediately comes into play (with adjustable sensitivity and duration). The gps alarm with locator can sense the vehicle's vibrations, and in the event of a collision or sudden impact, it emits an emergency alert. When the anti-theft mode is enabled, any vehicle vibration triggers the alarm and sends the alert to the GPS terminal tracking service platform or notifies the owner via SMS. This real-time response capability provides robust support for quickly addressing vehicle accidents and issues, ensuring the safety of the vehicle and its occupants.
Response Measures: If the sensitivity is too high and the gps tracker alarm frequently triggers, the vibration sensitivity can be adjusted appropriately. If the alarm is triggered by the vehicle owner, it can be ignored. If the alarm is triggered after the owner leaves the vehicle, it is necessary to check if the vehicle is behaving abnormally. For remote locations, the gps platform services can be used to check the vehicle's safety.
2. Power Cut Alarm:
When the vehicle's power is cut off, such as when the vehicle's battery is removed or the vehicle is maliciously tampered with, the gps alarm with locator can immediately detect the power loss and send an alarm message to the vehicle owner or relevant administrators.
Response Measures: If the gps tracker alarm is triggered by the vehicle owner's own operation, it can be disregarded. If the alarm is triggered while the vehicle is in use, caution should be exercised. There are two main scenarios:
(1) The device was not properly installed during installation, such as loose installation or automatic detachment. The vehicle owner can check the device's installation status again.
(2) If the alarm is triggered under normal usage conditions, immediately log in to the GPS terminal tracking service platform to check the specific status of the vehicle, such as whether it is offline or not at the designated location. If theft is suspected, report the incident to the authorities and provide the relevant information from the GPS terminal tracking service platform to assist in resolving the case.
3. Low Battery Alarm:
The GPS locator also supports battery monitoring functionality. This feature can monitor the voltage status of the vehicle's battery. Once the vehicle battery voltage falls below a set value or when the internal battery level is below 10%, a location-based alarm is triggered, and the gps tracker alarm information is sent to the GPS terminal tracking service platform or monitoring number. This is crucial in preventing vehicle startup failures or other malfunctions due to battery issues. Detecting and resolving battery problems promptly can prevent unexpected incidents during vehicle operation, saving unnecessary repair costs and time for the vehicle owner.
Response Measures:
(1) For wired GPS locators, upon receiving a low battery alarm, check the vehicle's specific location immediately to determine if it has been stolen.
(2) For rechargeable wireless GPS locators, when a low battery alarm is received, the vehicle owner should immediately recharge the device.
(3) For non-rechargeable wireless GPS locators, upon receiving a low battery alarm, the owner needs to replace the battery with a new one from the manufacturer or purchase a new device to avoid running out of power and losing track of the vehicle. Non-rechargeable wireless GPS locators, such as the Mobile-link Communication's three-year ultra-long standby GPS locator, default to a daily position update. If real-time tracking is activated, it may consume more power and needs to be turned off promptly when not in use.
4. Anti-Theft and Anti-Hijacking Function:
The alarm function of GPS locators is a crucial safeguard for vehicle security. By setting anti-theft and anti-hijacking alarms, the gps alarm with locator can automatically trigger alerts when the vehicle is stolen, hijacked, or illegally driven. This means that in case of abnormal situations, the vehicle owner or relevant administrators can receive immediate alarm notifications and take timely emergency measures. This real-time response capability helps prevent criminals from stealing vehicles or threatening the safety of passengers, providing comprehensive security protection for the vehicle.
Response Measures:
1. Notify Relevant Personnel Immediately: Upon receiving anti-theft and anti-hijacking alarm notifications, the first step is to immediately notify relevant personnel, including the vehicle owner, vehicle administrators, or security personnel. Timely notification ensures that they are aware of the vehicle's status and can take prompt action.
2. Report to the Police: If the anti-theft and anti-hijacking alarms indicate that the vehicle may have been stolen or hijacked, it is essential to report to the local police immediately. Provide the necessary information to the police, including the vehicle's description, location information, and the nearest timestamp, to enable them to respond quickly and initiate search operations.
3. Track the Vehicle's Location: If the GPS locator has real-time tracking capabilities, the location information can be used to track the vehicle's real-time position. This can help determine the vehicle's whereabouts and assist the police in locating the vehicle during the search operation.
4. Activate Anti-Theft Measures: Some vehicle locators are equipped with anti-theft features, such as remotely starting the vehicle's anti-theft function, locking the doors, or cutting off the engine power. Coordinating with the police, attempting to remotely activate these anti-theft measures can enhance the vehicle's security.
5. Prioritize Personal Safety: While dealing with anti-theft and anti-hijacking alarms, the vehicle owner or relevant personnel should always prioritize personal safety. Avoid direct contact with suspicious individuals or dangerous areas and maintain a safe distance until the police arrive.
6. Backup Evidence: If the gps alarm with locator has video surveillance capabilities, back up relevant videos or images as evidence to assist the police in their investigation.
7. Contact the Locator Supplier: If the vehicle locator is provided by a professional company, promptly contact the supplier for technical support and assistance. They may have more experience and resources in handling emergencies.
5. Over Speed Alarm:
Through the GPS locator's speed limit alarm function, vehicle owners or fleet managers can set the vehicle's maximum speed limit. When the vehicle exceeds this speed limit, the locator automatically triggers an alarm to remind the driver to drive safely and prevent traffic violations and accidents. This alarm mechanism helps drivers develop safe driving habits, ensuring stability and safety during vehicle operation.
Response Measures:
1. Instantly Alert the Driver: The GPS locator should be equipped with audible and visual alarm devices to promptly alert the driver when the vehicle is overspeeding. This helps drivers become aware of the speeding situation and promptly reduce speed to ensure driving safety.
2. Send Alarm Notifications: When the overspeed alarm is triggered, the gps alarm with locator can notify the vehicle owner or relevant administrators through mobile messages or application notifications. This way, the vehicle owner and relevant personnel can be immediately informed about the overspeed situation and take appropriate action.
3. Record and Playback Overspeed Trajectory: Some GPS locators can record the vehicle's travel trajectory, including instances of overspeeding
. Vehicle owners or administrators can use the playback function to review the vehicle's overspeed trajectory and understand specific overspeed situations and road segments. This helps monitor driving behavior and provide education and training when necessary.
-
Set Speed Limit: Vehicle owners or fleet managers can set the vehicle's maximum speed limit in the GPS locator based on actual needs. Setting a reasonable speed limit helps prevent vehicles from overspeeding. If overspeed alarms occur frequently, consider lowering the vehicle's maximum speed limit appropriately.
The gps tracker with geofence alarm function of the gps car alarm system is a virtual fence setting enabled through GPS technology and geofencing capabilities. Vehicle owners or administrators can define a specific area on the map, known as the geofence. Once the vehicle enters or exits this predetermined area, the gps alarm with locator immediately triggers an alert, notifying the owner or relevant administrators. This gps car alarm feature helps prevent the vehicle from crossing boundaries or unauthorized use, providing comprehensive vehicle monitoring and protection.
Adoption measures:
1. Set up the fence area: Vehicle owners or administrators use the locator's application or relevant platform to select a specific area on the map and set the range and shape of the geofence. The fence can be circular, rectangular, or custom-shaped to suit different needs.
2. Trigger an alert: Once the vehicle enters or exits the geofence area, the gps alarm with locator detects it immediately and triggers an alert. Alerts are typically sent to the owner or designated administrators through SMS, app notifications, or emails.
3. Prompt response: Upon receiving the geofence alert, the vehicle owner or administrators should take immediate action. If the vehicle crosses the boundary, it may indicate an anomaly, requiring confirmation of the vehicle's safety or the possibility of unauthorized use.
4. Anti-theft function: The gps tracker with geofence alarm feature can also be used for vehicle theft prevention. By setting the fence around parking lots or parking spaces, any movement of the vehicle beyond the fence area triggers an alert, alerting the owner to a potential vehicle theft.
5. Regular checking and updating: Vehicle owners or administrators should periodically review and update the geofence settings to ensure they align with actual needs. As vehicle usage changes, it may be necessary to adjust the fence range or shape.
The alarm function of GPS locators has multiple essential roles in ensuring vehicle safety. It not only prevents vehicle theft and unauthorized usage but also alerts drivers to drive safely, safeguarding both the vehicle and its occupants. By promptly responding to abnormal situations and taking emergency measures, the gps car alarm function provides comprehensive and reliable security protection for vehicles.
Great Will Vehicle Accessories GPS Tracker
We take pride in developing GPS & MDVR vehicle telematics devices to the highest global standards and delivering reliable IoT solutions.
From design to development and final products, quality checks are built into every phase of the product creation process.
● ISO9001, SGS Quality Management System
● More than 500 Production Line Employees
● More than 15 Senior Engineers
● 20,000 pcs Daily Output
● 2 R&D Centers
● More than 50 Countries Served
● More than 500 Production Line Employees
● More than 15 Senior Engineers
● 20,000 pcs Daily Output
● 2 R&D Centers
● More than 50 Countries Served
-
Building A2, Gosun West Lake Intelligence Industrial Park, No. 40 Hongling 3rd Road, Shuikou, Huicheng District, Huizhou City, Guangdong Province, China.
-
+86 - 18933252695
-
info@great-will.com
6 Reasons Why GPS Tracking on Electric Motorcycles Matters
Black gps tracker's two major components: Chips and Modules
Related Article
The dash cam with GPS, through functions such as real-time monitoring and driving behavior analysis, aids engineering vehicle transportation fleets in enhancing transportation efficiency, ensuring safe operations, and simultaneously reducing operational costs. It is an indispensable tool for fleet management.
The Introduction of Dash Cams Enhances Safe and Efficient Management of Engineering Fleet Vehicles
The GAT23 4G GPS tracker magnetic from Great-will company offers multiple location modes, 4G CAT1 network support, and a built-in high-capacity battery. It is waterproof and wireless, requiring no external power or installation. With its precise location, global network coverage, and ultra-long standby battery life, the GAT23 has profoundly impacted daily life, work styles, and social development.
4G GPS Tracker Magnetic GAT23 with A Multi Functional High Accuracy Long Standby Tracking Solution
The TR02K is a wired GPS tracker designed for a variety of vehicles, including car and motorcycle, offering real-time location tracking, multiple alarm functions, and remote monitoring. Its miniature size and easy-to-hide design, coupled with multiple working modes that support low-energy consumption, ensure extended battery life.
Versatile TR02K GPS Tracker Suitable for Car and Motorcycle
The GAT23 GPS tracker with magnet features 4G fast tracking, IP65 waterproof rating, long battery life, and immediate alert upon tampering. It safeguards asset security, enhances cost-efficiency, accelerates business operations, and is an essential tool for motorcycle and cargo logistics.
4G GPS tracker with magnet of A New Upgrade in Asset Management
For More Questions Please
Contact Us
+86 - 18933252695
info@great-will.com
Building A2, Gosun West Lake Intelligence Industrial Park, No. 40 Hongling 3rd Road, Shuikou , Huicheng District, Huizhou City, Guangdong Province,China.