How to install and monitor the automobile gps vehicle tracking system?
author: Ada Wu
2022-11-30
How to install and monitor the automobile gps vehicle tracking system?
There are three types of gps car trackers: OBD interface, wired and strong magnetic gps tracking device installation free type. Here is a brief introduction to the advantages and disadvantages of these three types of GPS tracker.
The biggest feature of the OBD interface auto tracker gps is that it is easy to install and directly inserted on the OBD interface. He has the additional function of reading some basic main parameters of the car. Such as fuel consumption, driving times, etc. Low safety factor, it can be easily removed without any technology. If you need to purchase an OBD gps tracking device, you must ensure that your vehicle supports it.
The wired gps vehicle tracking system connects the battery power supply of the vehicle with the power cord, and does not carry large capacity batteries. Once disassembled or the battery is powered off, the positioning ability will be lost in a short time (0.5-1.5 hours). While traditional wired GPS equipment can patiently record driving information, historical driving track, real-time alarm status, parking information and etc. After the ACC detection line is connected, it will be very convenient to manage the fleet. Compared with the OBD interface auto gps locator, its installation steps are also more complex.
The biggest characteristic of wireless or magnetic locator is its simplicity and portability. It carries a long standby life battery and can be placed anywhere in the car. Don't worry about long standby time (3-5 years).
The following points are the active modes for operating the GPS positioning terminal.
1. Install SIM card on the locator.
2. Fully charge the locator and/or connect the power cord so that the locator can be powered on for use.
3. Take the car or locator out and drive it outdoors for a period of time, and the locator can be activated for use.
The operation process of installing SIM card in the locator is as follows.
1. Open the locator back cover or the slot plug of the locator SIM card.
2. Install and insert the SIM card according to the good card picture on the locator.
3. Close the back cover or card slot plug;
Live operation mode of locator.
The biggest feature of the OBD interface auto tracker gps is that it is easy to install and directly inserted on the OBD interface. He has the additional function of reading some basic main parameters of the car. Such as fuel consumption, driving times, etc. Low safety factor, it can be easily removed without any technology. If you need to purchase an OBD gps tracking device, you must ensure that your vehicle supports it.
The wired gps vehicle tracking system connects the battery power supply of the vehicle with the power cord, and does not carry large capacity batteries. Once disassembled or the battery is powered off, the positioning ability will be lost in a short time (0.5-1.5 hours). While traditional wired GPS equipment can patiently record driving information, historical driving track, real-time alarm status, parking information and etc. After the ACC detection line is connected, it will be very convenient to manage the fleet. Compared with the OBD interface auto gps locator, its installation steps are also more complex.
The biggest characteristic of wireless or magnetic locator is its simplicity and portability. It carries a long standby life battery and can be placed anywhere in the car. Don't worry about long standby time (3-5 years).
The following points are the active modes for operating the GPS positioning terminal.
1. Install SIM card on the locator.
2. Fully charge the locator and/or connect the power cord so that the locator can be powered on for use.
3. Take the car or locator out and drive it outdoors for a period of time, and the locator can be activated for use.
The operation process of installing SIM card in the locator is as follows.
1. Open the locator back cover or the slot plug of the locator SIM card.
2. Install and insert the SIM card according to the good card picture on the locator.
3. Close the back cover or card slot plug;
Live operation mode of locator.
1.Wired Gps Tacker : You just need to find the positive and negative poles of the car power supply. The negative pole is easy to find. The body ground point is the negative pole. Find the positive pole in the fuse box, close to the car key switch or connect it directly to the battery. It can also be installed by relevant technicians.
Pay attention to: It is better to connect to the normal power supply. The power cord directly from the on-board battery, which has nothing to do with the vehicle key switch. The luminous side of the locator needs to face the sky. The other side facing the sky does not need to stick metal objects to block the internal GPS antenna. It also needs to receive satellite signals 20000 kilometers away.
2. Installation Free Wireless Gps Tracker :Connect the charging cable to the locator. Plug in the power supply and charge it first. When the locator is fully charged, the charging indicator of the locator will change color or stop flashing.
Note: Different types of locators have different display modes of charging indicators, which can be operated according to the indications of different types of locators.
Locator is a very useful device for drivers and car. Will installing the car locator damage the car?
If the cable car locator is installed, the cable may be hoisted but will not cause damage to the car. If the ACC cable is connected because the cable is broken.
If the wireless car gps locator is installed, the original vehicle independent power supply can be placed on the vehicle anywhere.
If the OBD auto locator is selected, it is only necessary to insert the OBD interface, which may not cause damage to the car. Therefore, the installation of the automobile locator will not cause damage to the automobile.
2. Installation Free Wireless Gps Tracker :Connect the charging cable to the locator. Plug in the power supply and charge it first. When the locator is fully charged, the charging indicator of the locator will change color or stop flashing.
Note: Different types of locators have different display modes of charging indicators, which can be operated according to the indications of different types of locators.
Locator is a very useful device for drivers and car. Will installing the car locator damage the car?
If the cable car locator is installed, the cable may be hoisted but will not cause damage to the car. If the ACC cable is connected because the cable is broken.
If the wireless car gps locator is installed, the original vehicle independent power supply can be placed on the vehicle anywhere.
If the OBD auto locator is selected, it is only necessary to insert the OBD interface, which may not cause damage to the car. Therefore, the installation of the automobile locator will not cause damage to the automobile.
Which is a good GPS locator and how to purchase GPS tracking device?
How to use the micro vehicle locator device?
Related Article
The dash cam with GPS, through functions such as real-time monitoring and driving behavior analysis, aids engineering vehicle transportation fleets in enhancing transportation efficiency, ensuring safe operations, and simultaneously reducing operational costs. It is an indispensable tool for fleet management.
The Introduction of Dash Cams Enhances Safe and Efficient Management of Engineering Fleet Vehicles
The GAT23 4G GPS tracker magnetic from Great-will company offers multiple location modes, 4G CAT1 network support, and a built-in high-capacity battery. It is waterproof and wireless, requiring no external power or installation. With its precise location, global network coverage, and ultra-long standby battery life, the GAT23 has profoundly impacted daily life, work styles, and social development.
4G GPS Tracker Magnetic GAT23 with A Multi Functional High Accuracy Long Standby Tracking Solution
The TR02K is a wired GPS tracker designed for a variety of vehicles, including car and motorcycle, offering real-time location tracking, multiple alarm functions, and remote monitoring. Its miniature size and easy-to-hide design, coupled with multiple working modes that support low-energy consumption, ensure extended battery life.
Versatile TR02K GPS Tracker Suitable for Car and Motorcycle
The GAT23 GPS tracker with magnet features 4G fast tracking, IP65 waterproof rating, long battery life, and immediate alert upon tampering. It safeguards asset security, enhances cost-efficiency, accelerates business operations, and is an essential tool for motorcycle and cargo logistics.
4G GPS tracker with magnet of A New Upgrade in Asset Management
For More Questions Please
Contact Us
+86 - 18933252695
info@great-will.com
Building A2, Gosun West Lake Intelligence Industrial Park, No. 40 Hongling 3rd Road, Shuikou , Huicheng District, Huizhou City, Guangdong Province,China.